技术数据

		SIMATIC ET 200SP Open Controller, CPU 1515SP PC2, 8 GB RAM, 128 GB CFast with Windows 10 IoT Enterprise 64-bit and S7-1500 Software Controller CPU 1505SP pre-installed, Interfaces: 1x Slot CFast, 1x slot SD/MMC, 1x connection for ET 200SP bus Adapter PROFINET, 1x 10/100/1000 Mbit/s Ethernet, 2x USB 3.0, 2x USB 2.0, 1x display port, Documentation on CFast Restore image on CFast
General information
Product type designation		CPU 1515SP PC2
HW functional status		from FS04
Engineering with
● STEP 7 TIA Portal configurable/integrated from version		V16
Installed software
● Visualization		No
● Control		S7-1500 Software Controller CPU 1505SP
Configuration control
via dataset		Yes
Control elements
Mode selector switch		1
Supply voltage
Type of supply voltage		24 V DC
permissible range, lower limit (DC)		19.2 V
permissible range, upper limit (DC)		28.8 V
Reverse polarity protection		Yes
Mains buffering
● Mains/voltage failure stored energy time		5 ms
Input current
Current consumption (rated value)		1.8 A; Full processor load, incl. ET 200SP modules and using USB
Current consumption (in no-load operation), typ.		0.5 A
Current consumption, max.		2.9 A
I²t		0.426 A²·s; with starting current inrush
Power
Active power input, max.		43 W; incl. ET 200SP modules and using USB
Infeed power to the backplane bus		8.75 W
Power loss
Power loss, typ.		16 W
Processor
Processor type		Intel Atom E3940, 1.6 GHz, 4 cores
Memory
Type of memory		DDR3L
Main memory		8 GB RAM
CFast memory card		Yes; 128 GB flash memory
SIMATIC memory card required		No
Work memory
● integrated (for program)		1 Mbyte
● integrated (for data)		5 Mbyte
● integrated (for CPU function library of CPU Runtime)		20 Mbyte
Load memory
● integrated (on PC mass storage)		320 Mbyte
Backup
● with UPS		Yes; all memory areas declared retentive
● with non-volatile memory		Yes
CPU processing times
for bit operations, typ.		10 ns
for word operations, typ.		12 ns
for fixed point arithmetic, typ.		16 ns
for floating point arithmetic, typ.		64 ns
CPU-blocks
Number of elements (total)		6 000; In addition to blocks such as DBs, FBs and FCs, UDTs, global constants, etc. are also regarded as elements
DB
● Number, max.		5 999; Number range: 1 to 65535
● Size, max.		5 Mbyte
FB
● Number, max.		5 998; Number range: 1 to 65535
● Size, max.		1 024 kbyte
FC
● Number, max.		5 999; Number range: 1 to 65535
● Size, max.		1 024 kbyte
OB
● Size, max.		1 024 kbyte
● Number of free cycle OBs		100
● Number of time alarm OBs		20
● Number of delay alarm OBs		20
● Number of cyclic interrupt OBs		20
● Number of process alarm OBs		50
● Number of DPV1 alarm OBs		3
● Number of isochronous mode OBs		1
● Number of technology synchronous alarm OBs		2
● Number of startup OBs		100
● Number of asynchronous error OBs		4
● Number of synchronous error OBs		2
● Number of diagnostic alarm OBs		1
Nesting depth
● per priority class		24
Counters, timers and their retentivity
S7 counter
● Number		2 048
Retentivity
— adjustable		Yes
IEC counter
● Number		Any (only limited by the main memory)
Retentivity
— adjustable		Yes
S7 times
● Number		2 048
Retentivity
— adjustable		Yes
IEC timer
● Number		Any (only limited by the main memory)
Retentivity
— adjustable		Yes
Data areas and their retentivity
Retentive data area (incl. timers, counters, flags), max.		410 kbyte; For storage in NVRAM; for storage in mass storage 5 242 020 bytes
Flag
● Size, max.		16 kbyte
● Number of clock memories		8; 8 clock memory bit, grouped into one clock memory byte
Data blocks
● Retentivity adjustable		Yes
● Retentivity preset		No
Local data
● per priority class, max.		64 kbyte; max. 16 KB per block
Address area
Number of IO modules		8 192
I/O address area
● Inputs		32 kbyte; All inputs are in the process image
● Outputs		32 kbyte; All outputs are in the process image
Subprocess images
● Number of subprocess images, max.		32
Hardware configuration
Integrated power supply		Yes
Number of distributed IO systems		20
Number of DP masters
● Via CM		1
Number of IO Controllers
● via PC interfaces		1
Rack
● Modules per rack, max.		64; CPU 1515SP PC + 64 modules + server module
● Quantity of operable ET 200SP modules, max.		64
● Quantity of operable ET 200AL modules, max.		16
● Number of lines, max.		1
PtP CM
● Number of PtP CMs		the number of connectable PtP CMs is only limited by the number of available slots
Time of day
Clock
● Type		Hardware clock
● Hardware clock (real-time)		Yes; Resolution: 1 s
● Backup time		6 wk; At 40 °C ambient temperature, typically
● Deviation per day, max.		10 s; Typ.: 2 s
Clock synchronization
● supported		Yes
● to DP, master		Yes
● on Ethernet via NTP		Yes
● on Windows clock, slave		Yes
Interfaces
Number of industrial Ethernet interfaces		2
Number of PROFINET interfaces		1
Number of PROFIBUS interfaces		1
Number of RS 485 interfaces		1; Via CM DP module
Number of USB interfaces		4; 2x USB 2.0, 2x USB 3.0 on front side
Number of SD card slots		1
Video interfaces
● Graphics interface		1x DisplayPort
1. Interface
automatic detection of transmission rate		Yes
Autonegotiation		Yes
Autocrossing		Yes
Number of connections		88
Interface types
● RJ 45 (Ethernet)		Yes; Via BusAdapter BA 2x RJ45
— Transmission rate, max.		100 Mbit/s
— Industrial Ethernet status LED		Yes
● Number of ports		2
● integrated switch		Yes
● BusAdapter (PROFINET)		Yes; Compatible BusAdapter: BA 2x RJ45, BA 2x FC, BA 2x SCRJ (from FS03, V2.2), BA SCRJ / RJ45 (from FS03, V3.1), BA SCRJ / FC (from FS03, V3.1), BA 2x LC (from FS03, V3.3), BA LC / RJ45 (from FS03, V3.3), BA LC / FC (from FS03, V3.3)
Protocols
● PROFINET IO Controller		Yes
● PROFINET IO Device		Yes
● SIMATIC communication		Yes
● Open IE communication		Yes
● Web server		Yes
PROFINET IO Controller
Services
— Isochronous mode		Yes
— shortest clock pulse		500 µs
— IRT		Yes
— PROFIenergy		Yes
— Prioritized startup		Yes; max. 32 PROFINET devices; if you want to use the "Prioritized startup" functionality in STEP 7 for the PROFINET interface of the CPU, the CPU and the device must be separated by means of a switch (e.g. SCALANCE X205)
— Number of connectable IO Devices, max.		128
— Of which IO devices with IRT, max.		64
— of which in line, max.		64
— Number of connectable IO Devices for RT, max.		128
— of which in line, max.		128
— Number of IO Devices that can be simultaneously activated/deactivated, max.		8
— IO Devices changing during operation (partner ports), supported		Yes
— Number of IO Devices per tool, max.		8
— Updating times		The minimum value of the updat time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data
updat time for IRT
— for send cycle of 500 µs		500 µs to 8 ms
— for send cycle of 1 ms		1 ms to 16 ms
— for send cycle of 2 ms		2 ms to 32 ms
— for send cycle of 4 ms		4 ms to 64 ms
— With IRT and parameterization of "odd" send cycles		updat time = set "odd" send clock (any multiple of 125 µs: 375 µs, 625 µs ... 3 875 µs)
updat time for RT
— for send cycle of 500 µs		500 µs to 256 ms
— for send cycle of 1 ms		1 ms to 512 ms
— for send cycle of 2 ms		2 ms to 512 ms
— for send cycle of 4 ms		4 ms to 512 ms
Address area
— Inputs, max.		8 kbyte
— Outputs, max.		8 kbyte
PROFINET IO Device
Services
— Isochronous mode		No
— shortest clock pulse		500 µs
— IRT		Yes
— PROFIenergy		Yes
— Prioritized startup		Yes
— Shared device		Yes
— Number of IO Controllers with shared device, max.		4
— Asset management record		Yes
2. Interface
Interface type		Integrated Ethernet interface
automatic detection of transmission rate		Yes
Autonegotiation		Yes
Autocrossing		Yes
Interface types
● RJ 45 (Ethernet)		Yes; Integrated
— Transmission rate, max.		1 000 Mbit/s
— Industrial Ethernet status LED		No
● Number of ports		1
3. Interface
Interface type		PROFIBUS with CM DP
Number of connections via this interface		44
Interface types
● RS 485		Yes
Protocols
● PROFIBUS DP master		Yes
● PROFIBUS DP slave		Yes
● SIMATIC communication		Yes
PROFIBUS DP master
● Number of DP slaves, max.		125
Services
— Equidistance		No
— Isochronous mode		No
Address area
— Inputs, max.		8 kbyte
— Outputs, max.		8 kbyte
Interface types
RS 485
● Transmission rate, max.		12 Mbit/s
Protocols
Number of connections
● Number of connections, max.		88
● Number of connections reserved for ES/HMI/web		10
● Number of S7 routing paths		16
Redundancy mode
Media redundancy
— MRP		Yes
— MRPD		Yes
— Switchover time on line break, typ.		200 ms
— Number of stations in the ring, max.		50
SIMATIC communication
● PG/OP communication		Yes
● S7 routing		Yes
● S7 communication, as server		Yes
● S7 communication, as client		Yes
● User data per job, max.		64 kbyte; BSEND/BRCV: 64 KB; PUT/GET: 960 bytes
Open IE communication
● TCP/IP		Yes
— Data length, max.		64 kbyte
● ISO-on-TCP (RFC1006)		Yes
— Data length, max.		64 kbyte
● UDP		Yes
— Data length, max.		2 048 byte
● SNMP		Yes
● DCP		Yes
● LLDP		Yes
Web server
● HTTP		Yes; Via Windows and PROFINET interface
● HTTPS		Yes; Via Windows and PROFINET interface
OPC UA
● Runtime license required		Yes; "Small" license required
● OPC UA Client		Yes; From SW CPU 1505SP V2.6
● OPC UA Server		Yes; Data access (read, write, subscribe), runtime license required
— Application authentication		Yes; Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256
— Security policies		Yes; Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256
— User authentication		Yes; "anonymous" or by user name & password
Further protocols
● MODBUS		Yes; MODBUS TCP
S7 message functions
Number of login stations for message functions, max.		32
Program alarms		Yes
Number of configurable program messages, max.		10 000
Number of simultaneously active program alarms		1 000
● Number of program alarms		1 000
● Number of alarms for system diagnostics		200
● Number of alarms for motion technology objects		160
Test commissioning functions
Joint commission (Team Engineering)		Yes; Parallel online access possible for up to 8 engineering systems
Status block		Yes; up to 8 simultaneously
Single step		No
Number of breakpoints		8
Status/control
● Status/control variable		Yes
● Variables		Inputs, outputs, memory bits, DB, times, counters
● Number of variables, max.
— of which status variables, max.		200
— of which control variables, max.		200
Forcing
● Forcing		Yes
● Forcing, variables		Inputs, outputs
● Number of variables, max.		200
Diagnostic buffer
● present		Yes
● Number of entries, max.		1 000
— of which powerfail-proof		300
Traces
● Number of configurable Traces		4
● Memory size per trace, max.		512 kbyte
Interrupts/diagnostics/status information
Diagnostics indication LED
● RUN/STOP LED		Yes
● ERROR LED		Yes
● MAINT LED		Yes
Supported technology objects
Motion Control		Yes
● Number of available Motion Control resources for technology objects		2 400
● Required Motion Control resources
— per speed-controlled axis		40; per axis
— per positioning axis		80; per axis
— per synchronous axis		160; per axis
— per external encoder		80; per external encoder
— per output cam		20; per cam
— per cam track		160; per cam track
— per probe		40; per probe
● Positioning axis
— Number of positioning axes at motion control cycle of 4 ms (typical value)		15
— Number of positioning axes at motion control cycle of 8 ms (typical value)		30
Controller
● PID_Compact		Yes; Universal PID controller with integrated optimization
● PID_3Step		Yes; PID controller with integrated optimization for valves
● PID-Temp		Yes; PID controller with integrated optimization for temperature
Counting and measuring
● High-speed counter		Yes
Standards, approvals, certificates
CE mark		Yes
CSA approval		Yes
cULus		Yes
FM approval		Yes
RCM (formerly C-TICK)		Yes
Ambient conditions
Ambient temperature during operation
● min.		-20 °C
● max.		Up to 60 °C with max. 32 ET 200SP modules; up to 55 °C with max. 64 ET 200SP modules
● horizontal installation, min.		-20 °C
● horizontal installation, max.		60 °C
● vertical installation, min.		-20 °C
● vertical installation, max.		50 °C; With max. 32 ET 200SP modules
Ambient temperature during storage/transportation
● min.		-40 °C
● max.		70 °C
Vibrations
● Operation, tested according to IEC 60068-2-6		Yes
● Transport, tested acc. to IEC 60068-2-6		Yes
Shock testing
● tested according to IEC 60068-2-6		Yes
● tested according to IEC 60068-2-27		Yes
● tested according to IEC 60068-2-29		Yes
● Storage/transport, tested acc. to IEC 60068-2-27		Yes
Operating systems
pre-installed operating system		Windows 10 IoT Enterprise 2016 LTSB, 64bit, MUI
Configuration
Programming
Programming language
— LAD		Yes
— FBD		Yes
— STL		Yes
— SCL		Yes
— CFC		No
— GRAPH		Yes
Know-how protection
● User program protection/password protection		Yes
● Copy protection		Yes
● Block protection		Yes
Access protection
● Protection level: Write protection		Yes
● Protection level: Read/write protection		Yes
● Protection level: Complete protection		Yes
Cycle time monitoring
● lower limit		adjustable minimum cycle time
● upper limit		adjustable maximum cycle time
Open Development interfaces
● Size of ODK SO file, max.		5.8 Mbyte
Peripherals/Options
SD card		Optionally for additional mass storage
Dimensions
Width		160 mm
Height		117 mm
Depth		75 mm